Kļūt par piegādātāju Pieslēgties

BÄUMER

Beļģija

Warehouse icon Vairumtirgotājs

BÄUMER
Web icon
Sazināties
Informācija

Uzņēmums BÄUMER, ir Vairumtirgotājs, kas dibināts 1963, gadā un darbojas Spiediena mērīšana un regulēšana - iekārtas un instrumenti nozarē. Tas darbojas arī Lāzers - iekārtas un instrumenti, electronic probes, Sensors, probes, transmitters, un theft alarm sensors nozarēs. Tas atrodas Westerlo, Beļģija.

Citi uzņēmumi šajā nozarē:

Mājas lapu

Link Variant icon Galvenā vietne

Domain icon Vairumtirgotājs

BÄUMER

Nijverheidsstraat 13

2260 Westerlo - Beļģija

Sazināties

Informācija par uzņēmumu

Atslēgas ciparu

  • Darbinieku skaita
    1 – 10

Organizācija

  • Dibināšanas gads
    1963
  • Uzņēmuma veids
    Administrācijas ēka
  • Pamatdarbība
    Vairumtirgotājs

BÄUMER darbības

  • Spiediena mērīšana un regulēšana - iekārtas un instrumenti
  • Lāzers - iekārtas un instrumenti
  • electronic probes
  • Sensors, probes, transmitters
  • theft alarm sensors
Office Building Outline icon
Lapa jūsu uzņēmumam
Jūs varat redzēt šo? Arī Jūsu potenciālie klienti Pievienojaties mums, lai būtu redzamiem europages mājas lapā.
Pievienot manu uzņēmumu

europages Jums arī iesaka

Uzņēmumu izvēle tuvu darbībai:

PETER HIRT GMBH

Šveice

Factory icon Ražotājs/ Izgatavotājs

Verified by europages badge

Peter Hirt linear ball bearings adapted to be play-free. The components of linear ball bearings, including shaft, ball cage and housing, are individually lapped and honed together in matched sets for each individual linear ball bearing. This ensures no stick-slip effect and maximum lifetime values. Peter Hirt thread gauge feelers are available from the smallest size of 0-200 (ball diameter 0.200 mm) up to size 12 (ball diameter 4.000 mm). The smallest thread gauge feeler at present, size 0-200 with a ruby ball diameter of 0.200 mm, is sized for measuring threads up to size M1.7. The thread gauge feelers are available individually or in a protective wooden box as a 12 pc, 13 pc or 14 pc set. Signal conditioning modules from Peter Hirt are specially calibrated for T-series tranducers with TESA® compatible half-bridge circuit. Modules are available with supply voltages of 5, 12 or 24 VDC and with a bipolar or unipolar output signal of ± 5 VDC, ± 10 VDC, 0-5 VDC, 0-10 VDC

PPS (PRESSURE PROFILE SYSTEMS)

Apvienotā Karaliste

Factory icon Ražotājs/ Izgatavotājs

Verified by europages badge

HÖNTZSCH GMBH

Vācija

Factory icon Ražotājs/ Izgatavotājs

Verified by europages badge

MELUTEC METROLOGY GMBH

Vācija

Office Building Outline icon Pakalpojumu sniedzējs

Verified by europages badge

Our calibration laboratory is accredited according to DIN EN ISO/IEC 17025 by DAkkS (Deutschen Akkreditierungsstelle GmbH [German Accreditation Body]) for measuring the parameters of length, torque, temperature, relative humidity and scales under register number D-K-15048-01-00. As an accredited DAkkS calibration laboratory, we comply with the requirements of all national and international standards. We don't just want to satisfy our customers; we want to inspire them. Since the company was founded in 1991, we have expanded to offer a variety of services and are currently continuously developing in this sector. We have extensive experience in calibration technology. Customers in Germany and around the world benefit from our knowledge and flexibility. See Melutec Metrology for yourself and you will discover why our expertise, flexibility and innovation put us head and shoulders above the competition.