Rezultāti

Custom-moulded plastic parts - Imports eksports

47 Uzņēmumi

0 Produktai

BIO-RAD - ÉTABLISSEMENT DE GÉMENOS (ANCIENNEMENT PLASTIFRANCE)

Francija

For over 60 years Plastifrance has designed, manufactured and sold plastic components for aeronautics, medicine, the car industry, etc. Our values are industrial excellence, quality service and innovation for parts perfectly suited to your applications. We manufacture plastic components by injection (plastic stops, plastic caps, sleeves and covers) to protect your parts during transport, surface treatment and finish (handles, nozzles …) and wiring management (cable glands, grommets, covers, clips and rivets…).

Mājas lapu
SCHAUENBURG INDUSTRIETECHNIK GMBH

Vācija

Schauenburg Industrietechnik GmbH, based in Nuremberg, is part of the globally active SCHAUENBURG INTERNATIONAL group of companies. The company's services are used by the automotive industry, the construction industry, mechanical engineers and producers in the household appliance sector. As an internationally recognised development and production partner, the company produces plastic and rubber moulded parts from drawings. The portfolio is rounded off by hoses, stamped parts and profiles. One particular advantage of the company is that it produces its own plastic moulded parts. Fully automated 24/7 production guarantees maximum efficiency for small and large-scale production alike. The company specialises in ultra-small moulded parts, measuring less than 10 mm. The variety of products offered is also matched by the scope of the logistics service: Tailored solutions in C-parts management and kanban highlight the importance placed on customer orientation and performing in line with the market. Schauenburg Industrietechnik GmbH is certified to DIN EN ISO 9001 standard

Mājas lapu
TOBY SCHAUM GMBH POLYURETHANVERARBEITUNG

Vācija

TOBY Schaum, founded in 1960, has been involved in the development of polyurethane moulded parts for series production right from the very start and can currently draw on 50 years of experience. As a result, our company boasts long-established expertise in the realisation of demanding customer projects in just about every industrial sector. We take great interest in supporting the design of moulded parts early on in the planning phase. Get in touch with your enquiry – we would be happy to help! TOBY Schaum produces integrated foam polyurethane moulded parts (semi-hard) in shore hardnesses from approx. 20 Shore 00 up to approx. 90 Shore A and moulded parts from rigid foam (integrated rigid foam and compact material) with densities of approx. 200 kg/m3 to 1100 kg/m3.

Mājas lapu
RICHTER FORMTEILE GMBH

Vācija

Having production sites around the world enables us to make use of individual skills and local traditions, which guarantees maximum quality and cost efficiency. Thanks to our experience with and expertise in various different casting methods, we can always offer you the optimal solution: Precision casting, sintering, MIM, sand casting, gravity die casting, closed die forging, plastic injection moulding and assemblies – including processing and surface treatment. Our staff will be happy to offer you professional advice for developing components; we will also gladly prefinance your goods and keep them in storage. You don't have to worry about legal matters with international suppliers either: As your German legal partner, we will take care of everything. Place your trust in 30 years of experience and technical expertise – for precision at its most efficient.

Mājas lapu
N&H TECHNOLOGY GMBH

Vācija

Uzņēmums N&H TECHNOLOGY GMBH, ir Ražotājs/ Izgatavotājs, gadā un darbojas Plastmasas materiālu apstrāde nozarē. Tas darbojas arī Data transmission cables, specially prepared, Membrane keyboards (complete solutions), Rubber precision moulded parts, Plastic moulded parts, Plastic moulded parts, customer-specific, Plastic Housings, Assemblies, electromechanical, Push buttons (switches), un Spring contacts nozarēs. Tas atrodas Willich, Vācija.

Lapa jūsu uzņēmumam

Jūs varat redzēt šo? Arī Jūsu potenciālie klienti Pievienojaties mums, lai būtu redzamiem europages mājas lapā.

Pievienot manu uzņēmumu

HA-WI KUNSTSTOFFE GMBH & CO. KG

Vācija

Uzņēmums HA-WI KUNSTSTOFFE GMBH & CO. KG, ir Ražotājs/ Izgatavotājs, gadā un darbojas Plastmasa - rūpnieciski izstrādājumi nozarē. Tas darbojas arī Coat racks, Plastic cover caps, Plastic spacers, Injection-moulded plastic parts, Plastic threaded plugs, Plastic edge protection profiles for packaging purposes, Plastic moulded parts, Plastic moulded parts, reinforced with glass fibre, un Plastic moulded parts, customer-specific nozarēs. Tas atrodas Bad Laasphe, Vācija.
MPI EUROPE GMBH

Vācija

Uzņēmums MPI EUROPE GMBH, ir Ražotājs/ Izgatavotājs, gadā un darbojas Gumijas un plastmasas iesmidzināšana nozarē. Tas darbojas arī Molded plastic parts, Plastic injection-moulded parts for the automotive industry, Plastic injection-moulded parts for medical technology, Plastic injection-moulded parts for small batches, Plastic injection moulded parts, technical, for vehicle construction, Technical-grade plastic parts, Injection-moulded parts, technical, Plastic moulded parts, reinforced with glass fibre, un Plastic components for medical technology nozarēs. Tas atrodas Doebeln, Vācija.
WEBER GMBH & CO. KG, KUNSTSTOFFTECHNIK UND FORMENBAU

Vācija

Uzņēmums WEBER GMBH & CO. KG, KUNSTSTOFFTECHNIK UND FORMENBAU, ir Ražotājs/ Izgatavotājs, gadā un darbojas Plastmasas materiālu apstrāde nozarē. Tas darbojas arī Assembly of plastic components, Plastics manufacturing, Plastic surfaces, In-mould decoration (IMD), injection moulding, Plastic injection parts, Plastic assemblies, Injection moulded plastic parts with metal insert, un Plastic moulded parts, reinforced with glass fibre nozarēs. Tas atrodas Dillenburg, Vācija.
DOGA MAKINA

Turcija

Doga Makina is an Istanbul-based company with more than 44 years (since 1978) of experience in the Manufacturing Sector. Our main activities include the production of precision parts, CNC machining, hydraulic chuck production, casting finishing, and more. Doga Makina is a well-known brand in Turkey for producing auxiliary parts, rolling pulleys, rolls, rings, etc. Because of our high manufacturing standards, since 2001, we have been certified with ISO 9001. We are a professional supplier of precision parts customization, we can provide you with: CNC machining parts, precision die casting parts, precision injection molding parts, MIM molding parts, precision stamping parts, plastic hardware molds. One-stop services such as non-standard automated design and manufacturing. Our CNC equipments are all from Germany, Japan, Korean We also produce turning and milling metal cutting work by the requested technical drawing in serial production. Thanks to our high-skilled team, we operate in Iron Steel, Construction, Energy, Automotive, Defense Industry sectors, and more – in Turkey and Worldwide! Do not hesitate to contact us! Advantages of Ordering CNC Machined Parts from Doga Makina: - Rapid Turnaround - Precision - Custom Finishes - Material Selection - Quality Control - Fast Delivery across Europe

Mājas lapu
GEBR. W. + H. ZAUGG AG

Šveice

In over 70 years, Gebr. W. + H. Zaugg AG has built up expertise that is unique. Only this way can perfect products be produced, which withstand the technically demanding market of today. Innovation and precision are essential in mould construction and injection moulding. We act and work accordingly every day to give our customers the best. The company Gebr. W. + H. Zaugg AG is a family business owned by Bettina Ulrich-Zaugg and Stephan Ulrich. We are your partner for perfect plastic parts, mould construction, production of individual parts, 3D printing and servicing.

Mājas lapu

FRANZ FISCHLER GMBH & CO. KG

Vācija

For more than 50 years, plastic moulded parts and abrasives have been at the forefront of our company. In the course of this, maximum precision and a highly innovative spirit have come to distinguish our individual solutions and leading products. Our guiding principle is to put the customer at the centre of our business. Your satisfaction alone is the basis of our success. For the long term, across all products and services, our commitment to you always applies: We will work together with you as your partner. You will receive a tailored solution specially developed for you that suits your individual requirements. You will benefit from leading products and high profitability as we continually strive to improve our quality and throughput times. To save energy and reduce consumption of raw materials, we manufacture using state-of-the-art technology while continually optimising our processes and products.

Mājas lapu
RUDOLF STÖFFL GES.M.B.H. TECHNISCHE PRODUKTE

Austrija

Innovative, skilled and fair ... with this philosophy in mind, a small team around Rudolf Stöffl founded the Austrian company RUDOLF STÖFFL GmbH in 1989. The company, based in Holzhausen and enjoying steady growth, made a name for itself right from the beginning, and took on a soon well established role on the market. Stöffl GmbH was primarily active in the sale and expansion of an extensive range of bonded rubber-metal products for trade and industry. Healthy growth and growing acceptance on the market created the conditions for efficient expansion into new product groups. We can now offer our customers: Profiles in the form of PVC edge trims, sealing profiles, sponge rubber, plastic parts such as moulded tube plugs or sealing elements, standard parts such as knobs and handles, cable glands, connections, and special components for conveyors. The product groups in the area of plastic hoses, PU protection profiles and rubber sheets were expanded.

Mājas lapu

VWH GMBH

Vācija

Tool and mould construction is an additional mainstay of our business. Our focus in this area is on plastic injection moulds for sophisticated technical parts. Our more than 30 years of experience in this area form the basis for innovative ideas, professional production and smooth implementation of projects. Insert and outsert injection moulding technology and sampling of injection moulds are part of our standard services, and our in-house injection moulding shop enables us to react spontaneously to your requirements. We can develop 0-series, prototypes and pre-series at very short notice. VWH offers a diverse pool of skills, ranging from development of initial ideas and designs to the production process through to packaging management. This enables us to ensure project support right from the very beginning. This is beneficial both for the customer and for the end product.

Mājas lapu
AYBERKSAN PLASTIK KALIP SANAYI

Turcija

AYBERKSAN Plastic Mold Industry started its service in 2004 in Ivedik Organized Industrial Zone with mold manufacturing. Considering that quality and customer satisfaction are equivalent, it has signed many successful projects in different sectors both at home and abroad in a short time. While demonstrating his sensitivity to quality with the certificates he has, his biggest investment has been the importance he gave to human resources and technological developments. It has expanded its vision by adding plastic injection, which is one of the integral parts of the industry, to its mold production, and has brought together thousands of products and services from the defense industry to the medical industry, from the automotive industry to furniture, from the park and garden group to the drilling industry. It has made it its mission to offer the most suitable solution to the demands of its customers in the field of plastic injection and injection molding. Accurate and efficient transfer of information is at the forefront of its commercial principles. It has always managed to remain dynamic with its technical capacity, sensitivity in R&D, and dedication to customer satisfaction. We'll be pleased to answer all you questions and observations, don't hesitate to contact us.

Mājas lapu
INTERNORM KUNSTSTOFFTECHNIK GMBH

Vācija

As a Grimme Group company, we produce high-quality plastic products in-house: Rollers and roller coatings made of polyurethane plastics, moulded parts and injection-moulded items. Franz Grimme founded the company in 1987 in Damme (South Oldenburg, Germany). With modern and efficient products, we have transformed from a small company into a medium-sized business. Nowadays, we offer a wide range of customer-specific solutions for the international market. We are active in many different fields.

Mājas lapu
OVE PLASMATEC GMBH

Vācija

OVE specialises in the activation of plastic parts and the coating and treatment of surfaces of elastomers, moulded parts and O-rings used in industry. Our specialist knowledge of how to reduce friction and wear on elastic components aims to achieve functional, economic and environmentally friendly optimisation of seals which are subjected to dynamic stress in accordance with our customers' individual specifications. Modern plasma technology allows us to adjust the tribological properties of a wide range of elastomers in terms of all customer-specific variables using sophisticated, custom-controlled computer technology.

Mājas lapu
KARL TRESKE GMBH GUMMI- UND KUNSTSTOFFTECHNIK

Vācija

Since 1909, Karl Treske GmbH, with headquarters in Berlin, has been a technical wholesaler for rubber and plastic products that are partly produced in-house. Our customers are from industry, trade and public administration in Europe and worldwide. We sell and manufacture the following: Seals, rubber and plastic profiles, rubber rollers, bellows, rubber moulded parts, PTFE parts, rubber, silicone, Klingersil and plastic sheets, cellular rubber and foam rubber, floor coverings, as well as special mats for horses and workplaces. Our products also include profiles made from rubber and foam rubber, cellular rubber strips, edge protection and window profiles, various rubber-metal connections, PVC and silicone hoses, drinking water, petroleum and compressed air hoses, adhesives and sealants, and much more. We enjoy a high level of customer satisfaction thanks to the knowledge of our employees, which is shared through personal, extensive and competent consulting services, and many years of company experience.

Mājas lapu
PEEKCHINA CO., LTD.

Ķīna

PEEKChina as a 15 years Chinese thermoplastic Polyetheretherketone manufacturer who is only focusing on PEEK material. Production of engineering plastic PEEK semi-finished and finished products. Materials can be Pure PEEK 1000, PEEK CF30, PEEK GF30 and PEEK MOD. For the semi-finished products, we cooperated with Jilin University and launched 15 lines of profile continuous extrusion production, which include PEEK Pipe, PEEK Sheet, PEEK Rod, PEEK Film, and PEEK Parts are both in machining process and injection molding. As well, we are researching with Xi’an Jiaotong University on PEEK 3D filaments and printers. From 2015, we became involved with long term implantable medical PEEK. Our medical PEEK has been certified by a lot of laboratories and colleges, it complies with ASTM F2026 and FDA/SGS certified, more and more medical device manufacturers and implantable material consumers choose us. As a Chinese top new material PEEK innovator, we spend 20% of our income on technical research. Our main customers are from USA, Europe, North America and Korea. ONLY IN PEEK, YOUR BEST CHOICE. ONLY IN PEEK, THE MOST PROFESSIONAL. CHINESE TOP SUPPLIER FOR PEEK PROFILES & PARTS.

Mājas lapu Apskatīt visus produktus
FKM SINTERTECHNIK GMBH

Vācija

FKM is a pioneer in selective laser sintering (SLS) in Germany and Europe. Since 1994, we have played a part in a revolutionary process of rethinking within the industry. Where previously tool and mould construction determined the rules of design, SLS 3D printing is now changing the entire manufacturing process. Today, complex geometries can be directly integrated into components. SLS can also lead to significantly fewer process steps for dynamic assemblies, such as, for example, functional grippers. SLS additive manufacturing simplifies designs, saves assembly costs and guarantees service life. After more than 25 years of practical experience in additive manufacturing, our customers can benefit from a machinery park which has grown to include 40 systems, various high-value pre- and after-sales services, as well as a significant advance in knowledge of functional, additively manufactured components made from plastic and metal.

Mājas lapu
BIEGLO GMBH

Vācija

BIEGLO is a distribution company for high-performance plastics based in Hamburg, Germany. We are the exclusive distributor of polyether ether ketone (PEEK) CoPEEK from Panjin Zhongrun and sell polyimide (PI) Meldin® from Saint Gobain and (TPI) AURUM® from Mitsui Chemicals. Our range also includes polybenzimidazole (PBI), polyamide-imide (PAI) and polyetherimide (PEI). We also recycle. We buy back clean, sorted PEEK scrap. International operations are important to BIEGLO. We have many foreign customers, and can now draw on an international network of suppliers to deliver our popular products. BIEGLO also operates a number of online shops: PEEK-shop.de, PI-shop.de, PAI-shop.de, PBI-shop.de and PEI-shop.de. Our CoPEEK comes from Panjin Zhongrun in China. We offer it as either granulate or powder in different viscosities. Our range also includes semi-finished products in PEEK, including plates, tubes, rods, filaments and films. Meldin® PI is supplied by Saint Gobain and manufactured in the USA. We supply Meldin® semi-finished products in the form of plates and rods, as well as direct formed parts. AURUM® thermoplastic polyimide from Mitsui Chemicals in Japan is the thermoplastic with the highest glass transition temperature (Tg) of 245 °C. We offer PBI and PBI PEEK compounds made from Celazole®. Products in the Celazole® T Series are PBI compounds developed for injection moulding and extrusion.

Mājas lapu

EWOQE GMBH & CO. KG

Vācija

EWOQE GmbH & Co. KG is your innovative partner in additive manufacturing and prototype construction, specialising in technical plastic injection-moulded parts and tailored solutions for vehicle construction, medical technology and beyond. With a focus on rapid prototyping, rapid tooling and 3D printing technologies, we offer a wide range of services, from 3D designs to small series production. Our expertise extends to the optimisation of component functions and throughput times in order to boost your innovative strength and save costs. Our aim is to efficiently solve challenges such as missing components or a lack of production capacity, and to offer you tangible added value. We see 3D printing as a tool for promoting innovation that fits perfectly into your production processes. From brainstorming to realisation, we support you with custom advice, and use our comprehensive expertise to successfully implement your projects. At EWOQE, we pride ourselves on achieving outstanding results every day, and see ourselves as your reliable B2B partner. Contact us at info@ewoqe.com to find out how we can contribute to the success of your next project with our expertise in 3D printing and additive manufacturing. Come to us to discover the unlimited possibilities of 3D printing for your product development.

Mājas lapu
SACEL GROUP

Itālija

Sacel is a company based in Ozegna with forty years of experience in the creation of moulds for sheet metal and plastic, thermoplastic moulding, sheet metal blanking, laser welding of metal and construction of automated solutions. The company boasts a large, cutting-edge fleet of machines and an R&D department which can design and implement processes after working with customers on the development of the product. Sacel manages all phases of the production chain, from the design of equipment to the delivery of parts, in line with the requirements of the customer. Our customers work in the AUTOMOTIVE, MEDICAL AND ELECTRONIC SECTORS. We operate internationally, through our offices in Italy, Slovakia and Mexico. Slovakia office: SACELEST Juzna Trieda, 125 00401 Kosice, Slovak Republic Tel: +421 557995541 info@sacelest.com Visit our website to discover the other offices throughout the world. For any further information, please get in touch.

Mājas lapu
MING XIAO MANUFACTURING CO., LTD

Ķīna

Ming Xiao Manufacturing Co., Ltd. is a professional ISO9001 certificated Metal Parts & Plastic Parts manufacturer, Located in China Ningbo, Specialized in Services of Sheet Metal Fabricating, CNC Turning & Machining, Tube Bending, Cold Forging & Hot Forging, Plastic Injection Molding & Plastic Extrusion. We produce small & large turned parts and machined parts, Precision CNC Turned Parts by CNC Turning & Milling. Metal stamping Parts, Deep Drawing Parts, Metal parts welding and forming, Pipe Bending & fabricating components, Cold & Hot Forged Parts from Stainless Steels, Carbon steels, Brass & Copper, Aluminum Alloys. And produce Plastic injection molded parts, Plastic extrusion profiles and tubes. We are working metal parts & plastic parts for various industries, custom produce a wide variety of machine parts and hardware components according customer’s drawing or sample, such as metal shafts, steel rods, bushings, Sleeves, Flanges, tubes, pipe coupling, fittings of valves; Metal stamping brackets, frames, clamps, casing, housing; deep drawn components; tube bending components; cold & hot forging parts, studs, bolts, screws, nuts, pins; steel wire forms, metal springs and all kinds metal components, plastic injection molded parts, plastic extrude profiles and pipes… We provide a wide range of machining services, can satisfy the customer many types of products one-time order. If you need custom any metal parts or plastic parts, pls feel free to contact us for a quote.

Mājas lapu
BECHTOLD & SOHN GMBH & CO. KG

Vācija

A name that has sounded good since 1885. It is not a sheer coincidence that Bechtold & Sohn can look back on a long and successful history. Now in its fourth generation, the family-run company will continue to remain on course with the same values held by master woodturner Johann Peter Bechtold when he founded his company back in 1885: Quality, continuity, personality and dedication. These virtues form the cornerstone of the company philosophy and have enabled Wolfgang Bechtold and his 150 employees to gain an excellent reputation among industrial companies, predominantly in the fields of pharmaceuticals, medicine and chemistry. Enthusiasm for plastic and technology Plastic has been the material of choice at Bechtold & Sohn for more than five decades now. This results in an enormous wealth of experience which our highly skilled employees use to produce plastic parts for well-known customers in three-shift operation.

Mājas lapu
PAUL THOORS GMBH KUNSTSTOFFVERARBEITUNG

Vācija

Manufacture of suction cups in all variants. Suction cups with threads, suction cups with hooks, suction cups with clamps, suction cups with cross holes, suction cups with studs, suction hooks, double suction cups and wall hooks. Paul Thoors GmbH is a market leader in its sector and has been producing high-quality suction cups and plastic items for a wide range sectors for over 65 years. The majority our total production volume is the manufacturing and distribution of our own products. We also manufacture according to drawings or samples as contracted work and as a supplier. We produce our wide range of products on the very latest production systems, e.g. with insertion robots and automated handling systems, thereby ensuring an efficient and reliable production flow.

Mājas lapu
WILHELM-PLASTIC GMBH & CO KG

Vācija

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

Mājas lapu
GW BATTERIEN GMBH

Vācija

As an innovative and flexible company, not only do we develop, build and supply battery systems using NiCd, lead and Li-ion technology, we also solve problems for a wide range of applications in the area of railway vehicle batteries and stationary battery systems. In combination with our extensive services, from reconditioning, storage and repairs through to customised leasing offers, we can assist you with our expertise. Our product range is rounded off by special innovations, including those in areas other than battery technology.

Mājas lapu
BÄCKER GMBH & CO. KG

Vācija

Bäcker has been a manufacturer and supplier of technical standard parts and control elements made of plastic and metal, as well as individual solutions made of plastic for industry, for more than 40 years. The wide product range of more than 5000 items with a total of 23, 000 different variants and dimensions of standard products from the three series PlacoGrip®, PlacoTec® and PlacoCap®. Overview of our product series. PlacoGrip® – control elements (knobs, levers, hinges, etc.). PlacoTec® – standard elements (DIN screws, nuts, washers made of plastic, etc.). PlacoCap® – protective elements (caps, plugs, sanitary fastenings, etc.) We manufacture products for leading industrial companies from a variety of sectors: Electrical engineering electronics, medical technology, machinery and systems engineering, the automotive industry, the chemical industry, shipbuilding, the leisure and sports equipment industry, the sanitary industry and rehabilitation equipment.

Mājas lapu
WALDKRAFT GMBH - BÜRSTEN- UND KUNSTSTOFFTECHNIK

Vācija

Waldkraft GmbH, founded by Knotz Bürsten GmbH, has been producing wooden and plastic brushes and injection moulding products of all kinds for over six decades to the satisfaction of its customers. As an independent family business, we are characterized by our commitment to our business partners and employees. The high quality standards of our products are at the heart of what we do. The versatility of our products stands us out from the crowd. The benchmark for this is the requirements of our customers. We believe the customer is king. To achieve these goals, it is key that our employees are motivated, highly trained and satisfied. We also feel a responsibility to our environment. Therefore, we use our wood waste as a heating medium for our factory. Furthermore, we use 100% natural energy sources for production.

Mājas lapu
LOUVRETTE GMBH VERPACKUNG + DESIGN

Vācija

LOUVRETTE has specialised in the development and production of top-quality plastic packaging solutions for the cosmetics industry for more than half a century.

Mājas lapu

Meklēt cenas priekš

Filtri

Rezultāti

Custom-moulded plastic parts - Imports eksports

Rezultātu skaits

47 Uzņēmumi