Rezultāti

Injection-moulded parts- technical - Imports eksports

43 Uzņēmumi

0 Produktai

PLS GMBH

Vācija

The top objective of our company is to make our customers happy. This means that we must recognise their needs, satisfy their requirements and exceed their expectations. In addition to a high product quality, the range of services offered is an important criterion for many customers. This is why we have striven right from the start to set up our departments in such a way that they complement each other. The collaboration between our mould construction, injection moulding, industrial assembly, quality assurance and post-processing departments allow us to cater expertly and very flexibly to the wishes of our customers. The prerequisite for this is communication. We need information to be able to offer an optimum product. This is why we consider feedback of any kind as important information for continuous improvement and further development. This is a cornerstone of our company's success.

Mājas lapu
WILHELM-PLASTIC GMBH & CO KG

Vācija

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

Mājas lapu
SAXONIA-FRANKE GMBH & CO. KG

Vācija

As a quality-conscious family business, SAXONIA-FRANKE supports its customers in all areas relating to stamping and forming technology, plastic injection-moulding technology and assembly installation. The company was founded in 1981 by Jörg Franke in Göppingen. The opportunity to move into a new, larger production building arose as early as 1987. Over the following years, extensions were built repeatedly, in order to cope with the constantly increasing order development in the company. In 2016, a new logistics centre was inaugurated. This measure allowed the production area to be expanded. Back in 2011, a generational change was introduced, and Felix Franke entered the management. Our success is based on innovation and drive, as well as a continuous commitment to quality and delivery reliability. This is ensured through qualified employees, through the use of the latest technology for machinery and through a uniform and sustainable concept for the implementation of tasks put forward by the customer. It's important to us here that the quality and economy of our work and products are closely linked with responsibility for the environment and society. Our integrated management system includes quality, environmental, work and health management. We are certified in line with ISO TS 16949, ISO 9001, ISO 14001, EMAS III and OSHAS, and are practitioners of the German Sustainability Code.

Mājas lapu
SWP SCHWARZWALD PRÄZISIONSTECHNIK GMBH

Vācija

SWP - Schwarzwald Präzisionstechnik has set itself the task of bundling strengths by cooperating with our innovative and efficient exclusive premium partner with in-house production and then providing these as a high-performance product portfolio. The expertise of our premium partner enables us to provide a tailor-made solution for every parts requirement. Top-quality in the best conditions combined with very short delivery times. Our premium partner’s machinery meets all current technical requirements. Together with our exclusive premium partner, we invest in trained and motivated staff so that we can always ensure the very best process safety. Short circuits and rapid communication are our credo, so that we answer all your questions within 24 hours. The best conditions for your success.

Mājas lapu
BUCK SPRITZGUSSTEILE FORMENBAU GMBH

Vācija

Uzņēmums BUCK SPRITZGUSSTEILE FORMENBAU GMBH, ir Ražotājs/ Izgatavotājs, gadā un darbojas Gumijas un plastmasas iesmidzināšana nozarē. Tas darbojas arī Plastic injection moulded parts, technical, for vehicle construction, Technical-grade plastic parts, Plastic injection moulded parts, Injection-moulded plastic parts, Plastic parts for the car industry, Plastic parts for electronic equipment, Precision plastic injection moulded parts, Injection-moulded parts, technical, un pad printing nozarēs. Tas atrodas Flachslanden, Vācija.

Lapa jūsu uzņēmumam

Jūs varat redzēt šo? Arī Jūsu potenciālie klienti Pievienojaties mums, lai būtu redzamiem europages mājas lapā.

Pievienot manu uzņēmumu

HA-WI KUNSTSTOFFE GMBH & CO. KG

Vācija

Uzņēmums HA-WI KUNSTSTOFFE GMBH & CO. KG, ir Ražotājs/ Izgatavotājs, gadā un darbojas Plastmasa - rūpnieciski izstrādājumi nozarē. Tas darbojas arī Coat racks, Plastic cover caps, Plastic spacers, Injection-moulded plastic parts, Plastic threaded plugs, Plastic edge protection profiles for packaging purposes, Plastic moulded parts, Plastic moulded parts, reinforced with glass fibre, un Plastic moulded parts, customer-specific nozarēs. Tas atrodas Bad Laasphe, Vācija.
WETEC GMBH

Vācija

Uzņēmums WETEC GMBH, ir Ražotājs/ Izgatavotājs, gadā un darbojas Gumijas un plastmasas iesmidzināšana nozarē. Tas darbojas arī Plastic assemblies, Plastic precision parts, Plastic injection-moulded parts, Technical-grade plastic parts, Plastics processing, Prototype construction, Injection moulding tools for plastics, injection moulds, un Injection-moulded parts made from thermoplastics nozarēs. Tas atrodas Schweppenhausen, Vācija.
G.A. RÖDERS GMBH & CO KG

Vācija

Uzņēmums G.A. RÖDERS GMBH & CO KG, ir Ražotājs/ Izgatavotājs, gadā un darbojas Plastmasas materiālu apstrāde nozarē. Tas darbojas arī Plastic injection moulding, Module assembly, pressure moulding, Design work (service), Plastic injection-moulded parts, Metal precision parts, Injection-moulded parts, technical, ultrasound welding, un tool manufacturing nozarēs. Tas atrodas Soltau, Vācija.
ÖZTUG ENDÜSTRI VE OTOMOTIV A.S.

Vācija

Uzņēmums ÖZTUG ENDÜSTRI VE OTOMOTIV A.S., ir Ražotājs/ Izgatavotājs, gadā un darbojas Plastmasas materiālu apstrāde nozarē. Tas darbojas arī Gumijas blīvējumi, bent wire parts, Moulded rubber parts, Prototype construction for the automotive industry, Injection-moulded parts, technical, Tool manufacture for the automotive and supplier industry, Bent wire parts, welded, Wire bending components with end machining, un Rubber floor coverings nozarēs. Tas atrodas Berlin, Vācija.
MPI EUROPE GMBH

Vācija

Uzņēmums MPI EUROPE GMBH, ir Ražotājs/ Izgatavotājs, gadā un darbojas Gumijas un plastmasas iesmidzināšana nozarē. Tas darbojas arī Molded plastic parts, Plastic injection-moulded parts for the automotive industry, Plastic injection-moulded parts for medical technology, Plastic injection-moulded parts for small batches, Plastic injection moulded parts, technical, for vehicle construction, Technical-grade plastic parts, Injection-moulded parts, technical, Plastic moulded parts, reinforced with glass fibre, un Plastic components for medical technology nozarēs. Tas atrodas Doebeln, Vācija.

VWH GMBH

Vācija

Tool and mould construction is an additional mainstay of our business. Our focus in this area is on plastic injection moulds for sophisticated technical parts. Our more than 30 years of experience in this area form the basis for innovative ideas, professional production and smooth implementation of projects. Insert and outsert injection moulding technology and sampling of injection moulds are part of our standard services, and our in-house injection moulding shop enables us to react spontaneously to your requirements. We can develop 0-series, prototypes and pre-series at very short notice. VWH offers a diverse pool of skills, ranging from development of initial ideas and designs to the production process through to packaging management. This enables us to ensure project support right from the very beginning. This is beneficial both for the customer and for the end product.

Mājas lapu
REICH MIM GMBH

Vācija

The expertise of Reich MIM GmbH is the production of metal injection moulded parts, or MIM for short. Reich MIM GmbH is located in Schwarzenberg in the German federal state of Saxony. With over 40 employees and a production area of approx. 2200 m², Reich MIM GmbH is a medium-sized company that is entirely family-owned. MIM technology is suitable for components with a high degree of shape complexity that are to be produced without reworking (undercuts, threads). The main areas of application are automotive and mechanical engineering, measurement and control technology, precision mechanics, the lock and fittings industry, tool technology, medical technology and the field of household appliances.

Mājas lapu

GEFICCA SA

Francija

Uzņēmums GEFICCA SA, ir Ražotājs/ Izgatavotājs, gadā un darbojas Gumija - pārstrāde un pusfabrikāti nozarē. Tas darbojas arī Gumija - izstrādājumi, Gumija - rūpnieciskas un tehniskas preces, Gumija - produkti automašīnām un transportam, Gumija - medicīnas preces, Putugumija, Gumija un plastmasa - apstrāde, Gumija - izstrādājumi, Gumija - rūpnieciskas un tehniskas preces, un Gumija - produkti automašīnām un transportam nozarēs. Tas atrodas Cosne Sur Loire Cedex, Francija.
SKS METAPLAST SCHEFFER-KLUTE GMBH

Vācija

Uzņēmums SKS METAPLAST SCHEFFER-KLUTE GMBH, ir Ražotājs/ Izgatavotājs, gadā un darbojas Plastmasas materiālu apstrāde nozarē. Tas darbojas arī Liquid coolant couplings for motor vehicles, Assemblies for the automotive industry, Plastic assemblies, Plastic moulded parts, reinforced with glass fibre, plastic hoses, Plastic parts for the automotive industry, Plastics manufacturing, Assembly of plastic components, un Extruded pipes nozarēs. Tas atrodas Sundern, Vācija.
DOGA MAKINA

Turcija

Doga Makina is an Istanbul-based company with more than 44 years (since 1978) of experience in the Manufacturing Sector. Our main activities include the production of precision parts, CNC machining, hydraulic chuck production, casting finishing, and more. Doga Makina is a well-known brand in Turkey for producing auxiliary parts, rolling pulleys, rolls, rings, etc. Because of our high manufacturing standards, since 2001, we have been certified with ISO 9001. We are a professional supplier of precision parts customization, we can provide you with: CNC machining parts, precision die casting parts, precision injection molding parts, MIM molding parts, precision stamping parts, plastic hardware molds. One-stop services such as non-standard automated design and manufacturing. Our CNC equipments are all from Germany, Japan, Korean We also produce turning and milling metal cutting work by the requested technical drawing in serial production. Thanks to our high-skilled team, we operate in Iron Steel, Construction, Energy, Automotive, Defense Industry sectors, and more – in Turkey and Worldwide! Do not hesitate to contact us! Advantages of Ordering CNC Machined Parts from Doga Makina: - Rapid Turnaround - Precision - Custom Finishes - Material Selection - Quality Control - Fast Delivery across Europe

Mājas lapu
GEBR. W. + H. ZAUGG AG

Šveice

In over 70 years, Gebr. W. + H. Zaugg AG has built up expertise that is unique. Only this way can perfect products be produced, which withstand the technically demanding market of today. Innovation and precision are essential in mould construction and injection moulding. We act and work accordingly every day to give our customers the best. The company Gebr. W. + H. Zaugg AG is a family business owned by Bettina Ulrich-Zaugg and Stephan Ulrich. We are your partner for perfect plastic parts, mould construction, production of individual parts, 3D printing and servicing.

Mājas lapu
AYBERKSAN PLASTIK KALIP SANAYI

Turcija

AYBERKSAN Plastic Mold Industry started its service in 2004 in Ivedik Organized Industrial Zone with mold manufacturing. Considering that quality and customer satisfaction are equivalent, it has signed many successful projects in different sectors both at home and abroad in a short time. While demonstrating his sensitivity to quality with the certificates he has, his biggest investment has been the importance he gave to human resources and technological developments. It has expanded its vision by adding plastic injection, which is one of the integral parts of the industry, to its mold production, and has brought together thousands of products and services from the defense industry to the medical industry, from the automotive industry to furniture, from the park and garden group to the drilling industry. It has made it its mission to offer the most suitable solution to the demands of its customers in the field of plastic injection and injection molding. Accurate and efficient transfer of information is at the forefront of its commercial principles. It has always managed to remain dynamic with its technical capacity, sensitivity in R&D, and dedication to customer satisfaction. We'll be pleased to answer all you questions and observations, don't hesitate to contact us.

Mājas lapu
JUNIE - JUL. NIEDERDRENK GMBH & CO. KG

Vācija

JuNie specialises in the production of high-quality furniture locks and industrial fasteners. We have been developing and manufacturing for over 140 years at our site in Velbert, Germany. The fact that we manufacture our own tools and moulds in-house ensures a high level of precision and flexibility in our work. Our modern machinery enables us to carry out a variety of manufacturing techniques, such as CNC-controlled die casting and injection moulding as well as punching and turning. The demand for high-quality products requires a reliable assembly process that either takes place manually or is fully automated, depending on technical and economic requirements. Regular quality controls guarantee the functionality of the final product. Thanks to our extensive warehouse of semi-finished and ready-to-deliver parts, we are able to supply our customers with our products in a very short space of time. The ability to make repeat orders or extensions to master key systems is guaranteed for decades to come, since all the necessary data for this is archived.

Mājas lapu
PEEKCHINA CO., LTD.

Ķīna

PEEKChina as a 15 years Chinese thermoplastic Polyetheretherketone manufacturer who is only focusing on PEEK material. Production of engineering plastic PEEK semi-finished and finished products. Materials can be Pure PEEK 1000, PEEK CF30, PEEK GF30 and PEEK MOD. For the semi-finished products, we cooperated with Jilin University and launched 15 lines of profile continuous extrusion production, which include PEEK Pipe, PEEK Sheet, PEEK Rod, PEEK Film, and PEEK Parts are both in machining process and injection molding. As well, we are researching with Xi’an Jiaotong University on PEEK 3D filaments and printers. From 2015, we became involved with long term implantable medical PEEK. Our medical PEEK has been certified by a lot of laboratories and colleges, it complies with ASTM F2026 and FDA/SGS certified, more and more medical device manufacturers and implantable material consumers choose us. As a Chinese top new material PEEK innovator, we spend 20% of our income on technical research. Our main customers are from USA, Europe, North America and Korea. ONLY IN PEEK, YOUR BEST CHOICE. ONLY IN PEEK, THE MOST PROFESSIONAL. CHINESE TOP SUPPLIER FOR PEEK PROFILES & PARTS.

Mājas lapu Apskatīt visus produktus
EWOQE GMBH & CO. KG

Vācija

EWOQE GmbH & Co. KG is your innovative partner in additive manufacturing and prototype construction, specialising in technical plastic injection-moulded parts and tailored solutions for vehicle construction, medical technology and beyond. With a focus on rapid prototyping, rapid tooling and 3D printing technologies, we offer a wide range of services, from 3D designs to small series production. Our expertise extends to the optimisation of component functions and throughput times in order to boost your innovative strength and save costs. Our aim is to efficiently solve challenges such as missing components or a lack of production capacity, and to offer you tangible added value. We see 3D printing as a tool for promoting innovation that fits perfectly into your production processes. From brainstorming to realisation, we support you with custom advice, and use our comprehensive expertise to successfully implement your projects. At EWOQE, we pride ourselves on achieving outstanding results every day, and see ourselves as your reliable B2B partner. Contact us at info@ewoqe.com to find out how we can contribute to the success of your next project with our expertise in 3D printing and additive manufacturing. Come to us to discover the unlimited possibilities of 3D printing for your product development.

Mājas lapu

WERNER LANGER GMBH & CO. KG

Vācija

Werner Langer, metal & plastic processing: Over 90 employees, more than 50 years of industry experience, recognised as a high-tech company – this is our profile. Certification in accordance with DIN EN ISO 9001: 2000. We have proven ourselves as a supplier to sectors such as model making, foundry products, automotive, construction industry, electrical and the household goods industry. As a manufacturer of high quality plastic components, we can supply both plastic components and complete assemblies.

Mājas lapu
ZIMMER GMBH KUNSTSTOFFTECHNIK

Vācija

Development, prototypes, mould construction, series production, tool transfer. We take care of you at every stage of your project. The all-round, carefree package. In the age of digital transformation, we at THE KNOW-HOW FACTORY accompany our customers worldwide on the road to technological excellence. We see ourselves not only as a technological leader and one-stop manufacturer of hardware and software, but also as a competent research and development partner. The Zimmer Group stands for family business, passion, innovation, stability, know-how and vision to ensure our customers’ growth as a future full-range provider.

Mājas lapu
BECHTOLD & SOHN GMBH & CO. KG

Vācija

A name that has sounded good since 1885. It is not a sheer coincidence that Bechtold & Sohn can look back on a long and successful history. Now in its fourth generation, the family-run company will continue to remain on course with the same values held by master woodturner Johann Peter Bechtold when he founded his company back in 1885: Quality, continuity, personality and dedication. These virtues form the cornerstone of the company philosophy and have enabled Wolfgang Bechtold and his 150 employees to gain an excellent reputation among industrial companies, predominantly in the fields of pharmaceuticals, medicine and chemistry. Enthusiasm for plastic and technology Plastic has been the material of choice at Bechtold & Sohn for more than five decades now. This results in an enormous wealth of experience which our highly skilled employees use to produce plastic parts for well-known customers in three-shift operation.

Mājas lapu
LOUVRETTE GMBH VERPACKUNG + DESIGN

Vācija

LOUVRETTE has specialised in the development and production of top-quality plastic packaging solutions for the cosmetics industry for more than half a century.

Mājas lapu
WALDKRAFT GMBH - BÜRSTEN- UND KUNSTSTOFFTECHNIK

Vācija

Waldkraft GmbH, founded by Knotz Bürsten GmbH, has been producing wooden and plastic brushes and injection moulding products of all kinds for over six decades to the satisfaction of its customers. As an independent family business, we are characterized by our commitment to our business partners and employees. The high quality standards of our products are at the heart of what we do. The versatility of our products stands us out from the crowd. The benchmark for this is the requirements of our customers. We believe the customer is king. To achieve these goals, it is key that our employees are motivated, highly trained and satisfied. We also feel a responsibility to our environment. Therefore, we use our wood waste as a heating medium for our factory. Furthermore, we use 100% natural energy sources for production.

Mājas lapu
PAUL THOORS GMBH KUNSTSTOFFVERARBEITUNG

Vācija

Manufacture of suction cups in all variants. Suction cups with threads, suction cups with hooks, suction cups with clamps, suction cups with cross holes, suction cups with studs, suction hooks, double suction cups and wall hooks. Paul Thoors GmbH is a market leader in its sector and has been producing high-quality suction cups and plastic items for a wide range sectors for over 65 years. The majority our total production volume is the manufacturing and distribution of our own products. We also manufacture according to drawings or samples as contracted work and as a supplier. We produce our wide range of products on the very latest production systems, e.g. with insertion robots and automated handling systems, thereby ensuring an efficient and reliable production flow.

Mājas lapu
IMOLDING DEUTSCHLAND GMBH

Vācija

iMed is an expert supplier of technical precision parts and assemblies made from plastic in small-, medium- and large-scale series for use in key industries. As a system supplier, iMed can look back on more than a decade of experience. This experience is not limited to a single branch of industry. It's not just the use of state-of-the-art technology that has ensured satisfied, long-standing customers and their trust in the production quality of iMed. Outstanding employees accompany each product from the first development step all the way through to series production. iMed values supporting the company's own new recruits as well as offering continuous and further training, and intensive courses. Our in-house experts therefore work with the same professionalism that is displayed by the customer's experts.

Mājas lapu
GOLDEN COMPOUND GMBH

Vācija

Since being established in 2014, we have acquired a wealth of experience in injection moulding and extrusion and have developed our own products such as home-compostable coffee pods and plant pots which are biodegradable in soil. We are a leading compounder of biocomposites containing sunflower seed shells. Our key products provide innovative solutions for injection moulding and extrusion. GC pro combines sunflower seed shells with standard polyolefins to make the materials more eco-friendly and to reduce the use of plastic. At the same time, the material is 100% recyclable. With GC green, we focus on biodegradable bioplastics which are used in our granules, coffee pods and plant pots. We have verified the biodegradability of many of our compounds and products with the "OK Compost Home" or "OK Biodegradable Soil" certificates issued by TÜV Austria. As a partner, we also offer you comprehensive project support and synergy effects with other manufacturers. Our long-term vision is to reduce the amount of plastic brought onto the market and replace it with biomaterials. We prioritise honesty, transparency and sustainability in all of our business activities. As a pioneer, we use waste products from the food industry to reduce environmental pollution. We are proud to offer innovative solutions and make good use of waste materials. Get in touch with us and play your part in a sustainable future with Golden Compound

Mājas lapu
N&H TECHNOLOGY GMBH

Vācija

Uzņēmums N&H TECHNOLOGY GMBH, ir Ražotājs/ Izgatavotājs, gadā un darbojas Plastmasas materiālu apstrāde nozarē. Tas darbojas arī Data transmission cables, specially prepared, Membrane keyboards (complete solutions), Rubber precision moulded parts, Plastic moulded parts, Plastic moulded parts, customer-specific, Plastic Housings, Assemblies, electromechanical, Push buttons (switches), un Spring contacts nozarēs. Tas atrodas Willich, Vācija.
PROCESS THERMOPLASTIC

Francija

Uzņēmums PROCESS THERMOPLASTIC, ir Apakšuzņēmējs, gadā un darbojas Plastmasas materiālu liešana nozarē. Tas darbojas arī Plastic injection, Plastic injection mould, plastic injection moulding, Plastics manufacturing, bi-material plastic injection, bi-material plastic moulding, bi-material plastic parts, Plastic parts, un plastic injection tools nozarēs. Tas atrodas Challans, Francija.

Meklēt cenas priekš

Filtri

Rezultāti

Injection-moulded parts- technical - Imports eksports

Rezultātu skaits

43 Uzņēmumi