Rezultāti

Forging

17 Uzņēmumi

0 Produktai

BASEDO STEEL GMBH

Vācija

Four reasons to choose BASEDO STEEL. 1) Expertise: We are familiar with the specific situation faced by steel processing companies. No matter how high your requirements, or how different your materials and measurements are – we will take care of it. Exotic materials in particular are no problem for us either. 2) Service: We have numerous materials in stock at our modern warehouse in Düsseldorf, Germany. Our high-performance automated bandsaws can be used to saw steel for you at any fixed length you desire. 3) Network: Even if we do not have a material on site, we can still draw on a large international network of distributors, manufacturers, smiths and machining companies to ensure that your request does not fall by the wayside. 4) Logistics: Whether by courier service, shipping company, sea or air, we know the best way to get a specific cargo to its destination – quickly, reliably and all for a good price.

Mājas lapu
ROLF KIND GMBH

Vācija

Uzņēmums ROLF KIND GMBH, ir Ražotājs/ Izgatavotājs, gadā un darbojas Tērauda un metālu pārstrāde nozarē. Tas darbojas arī forging, CNC finishing, Special materials, un nickel alloys nozarēs. Tas atrodas Gummersbach, Vācija.
IT FORGING

Vācija

Uzņēmums IT FORGING, ir Ražotājs/ Izgatavotājs, gadā un darbojas Tērauds un metāli - formēšana un griešana nozarē. Tas darbojas arī Tērauds un metāli - mehāniskā apstrāde, Rokas instrumenti bez motora, Kalta dzelzs, Dzelzs kalumi - veidnes un presēšana, Tērauds un metāli - mehāniskā apstrāde, Rokas instrumenti bez motora, Kalta dzelzs, un Dzelzs kalumi - veidnes un presēšana nozarēs. Tas atrodas Düsseldorf, Vācija.
ENERGIETECHNIK ESSEN GMBH

Vācija

Energietechnik Essen GmbH – a member of the Georgsmarienhütte Group – bases its capabilities and skills on continuous research and development as well as on experience reaching back to 1811. The Energietechnik Essen GmbH develops, produces and supplies safety-relevant high-tech products, mainly for manufacturers of power generation machinery. When the first turbo-generator was built at the start of the 20th century, the Essen-based company supplied the retaining rings. Retaining rings are placed on the ends of the rotors to fix the copper coil against the centrifugal forces created by the high rotational speeds. The oldest documents in the company's archive relating to non-magnetisable retaining rings date back to 1901. Energietechnik Essen GmbH uses two remelting units, one electroslag remelting unit and one pressurised electroslag remelting unit, to produce the materials for retaining rings.

Mājas lapu
CHR. HÖVER & SOHN GMBH & CO KG

Vācija

For over 80 years, Höver & Sohn has stood for unrivalled quality. Yet this does not mean that we're beating the same old drum even now – the fire of passion for stainless steel is still part of our philosophy. Traditional values meet modern CNC technology: This combination guarantees quality that "just makes you happy". We are experienced and motivated, traditional and modern, committed and ready to meet your requirements. Chr. Höver & Sohn GmbH & Co. KG enjoys a worldwide reputation of providing the highest quality and reliability. At Höver, quality is not just a written word, but a universal principle of incorporating company culture in real life. As an independent specialist department, quality assurance is directly bound to company management from an organisational point of view. To Höver, quality without compromises down to the finest detail is a must. Quality and safety are integral parts of our company's philosophy.

Mājas lapu

Lapa jūsu uzņēmumam

Jūs varat redzēt šo? Arī Jūsu potenciālie klienti Pievienojaties mums, lai būtu redzamiem europages mājas lapā.

Pievienot manu uzņēmumu

BROCKHAUS GMBH & CO. KG

Vācija

Since 1921, the BROCKHAUS Group of companies has supplied high-quality forged parts for all industry sectors. We place particular emphasis on consulting our customers in a targeted manner right from the start. This is because if the forged shape can be adapted in the early stage of parts development so that it is as close to the desired end form as possible, the processing costs can then be kept to a minimum. Feel free to get in touch with us and find out what we can do for you. We offer customised solutions for your products in proven BROCKHAUS quality.

Mājas lapu
KB SCHMIEDETECHNIK GMBH - A GERMAN DROP FORGE - CLOSED DIE FORGINGS - ALL STEEL GRADES

Vācija

DENEN ISO14001KB Schmiedetechnik is an independent medium-sized company with over 100 years' experience in the manufacture of closed-die forgings for different areas of application with extreme requirements such as high pressure, high/low temperatures and high safety requirements. We specialise in small-scale batches of up to a unit weight of 130 kg, all types of steel, roughly or mechanically machined. Certified in accordance with ISO9001, AD2000, DGRL 97/23/EG, KTA, AVSD, ASME/ASTM, RCC-M, DENEN ISO14001.

Mājas lapu
KARL DIEDERICHS GMBH & CO. KG

Vācija

Uzņēmums KARL DIEDERICHS GMBH & CO. KG, ir Ražotājs/ Izgatavotājs, gadā un darbojas Tērauds nozarē. Tas darbojas arī Open-die forge, Quenching and tempering, heat treatment, Turning workshop, Finishing of rolled products, Seamless rings, laminated hoops, Forged products, un Round blanks nozarēs. Tas atrodas Remscheid, Vācija.
USD FORMTEILTECHNIK GMBH

Vācija

Uzņēmums USD FORMTEILTECHNIK GMBH, ir Mazumtirgotājs, gadā un darbojas Melnā un krāsainā metāla rūdas nozarē. Tas darbojas arī pressure moulding, forges, Metal - forming and cutting, un precision casting nozarēs. Tas atrodas Meinerzhagen, Vācija.
OTTO JUNKER CM GMBH

Vācija

The Otto Junker high-grade steel foundry in Lammersdorf, Simerath (20 km south of Aachen), specialises in special alloys. Our range of materials offers customers a wide selection of high-alloy iron-, nickel- and cobalt-based varieties. These materials are melted in highly efficient induction ovens, using vacuum technology where required. Our range of products includes corrosion-resistant alloys, heat-resistant alloys, non-magnetisable alloys, hard-wearing alloys and multiple special nickel- and cobalt-based alloys. We also make cast ferrous materials designed to handle exceptionally high levels of stress corrosion from JUNKERALLOY® nickel-based alloys. We have been producing and supplying many of these materials for decades. We produce more materials than are shown on our website – about 100 varieties in total.

Mājas lapu

WERNER KEMMINER GMBH

Vācija

We are a company in the metalworking industry and have specialised in the manufacture of flanges/flange rings, circlips, collars and bands/round plates since the beginning of the 1960s. So that we can process orders as quickly as possible, in addition to two-part circlips for 1 mm and for 2-3 mm piping, we permanently stock over 100, 000 flange rings in accordance with EN 12220 (Edition 06/98), DIN 24154 (Edition 07/66) Series 2-5, as well as flange rings in accordance with DIN 24154 (Edition 07/90) Part I+II in rough, galvanised and stainless steel versions (material 1.4301, 1.4541, 1.4571). Our highly flexible production lines mean that we can manufacture flange rings with special dimensions to order quickly, precisely and cost-effectively. We are happy to provide you with an individual quote. Reliability, flexibility and high quality. Qualities that our customers both within Germany and abroad have valued highly for decades.

Mājas lapu
GIESSTECHNIK BREMER GMBH

Vācija

Gießtechnik Bremer GmbH was founded in March 1992. The Gießtechnik Bremer name has been synonymous with competence, expertise, customer focus and selective, quality-conscious product procurement for the benefit of our customers ever since. Thanks to many years of experience, Gießtechnik Bremer has built up an excellent reputation as a trustworthy partner. Our goal-oriented, dedicated work ethic which benefits our customers and suppliers provides a foundation for steady business growth. We have grown over the years and now have a total of twelve qualified staff members. This not only enables us to provide even better support for our projects and customers, but also expands the range of services that our business provides in the construction and quality control sectors. This integrated process gives us a key competitive advantage in the eyes of our customers.

Mājas lapu

BECHTEL GMBH

Vācija

Bechtel from Wuppertal is a supplier of spare parts and components for the bulk handling industry. We are your contact for parts in: elevators, chain conveyors, screw conveyor. We supply from our extensive stock conveyor chains, drop forged chains, sprockets, elevator belting, elevator buckets and much more with short delivery times. We also offer our customers quick delivery times for special solutions such as special materials or special designs. We have the possibility to design millimeter-precision special designs by means of 3D-supported software and present them accordingly to the customer. We draw on a great experience and offer our customers practical solutions for every need. Together with the customer, we work out solutions for elevators, chain conveyors and screw conveyors.

Mājas lapu
SCHRAUBEN UND DRAHT UNION GMBH & CO KG

Vācija

Uzņēmums SCHRAUBEN UND DRAHT UNION GMBH & CO KG, ir Vairumtirgotājs, gadā un darbojas Tērauda un metālu virpošana nozarē. Tas darbojas arī Vītņoti stieņi, screws, Special parts, tailor-made, CNC turned parts made from special materials, CNC turned steel parts, Extension bolts, Vītņoti stieņi, Oil-drain screws, un Screws made of special materials nozarēs. Tas atrodas Bochum, Vācija.
AK STEEL INTERNATIONAL B.V.

Vācija

Uzņēmums AK STEEL INTERNATIONAL B.V., ir Izplatītājs, gadā un darbojas Šķirnes tēraudi nozarē. Tas darbojas arī EMC shielding, Aerospace materials (stainless steels for aerospace), Aerospace materials (metals for aerospace), Free-form forged parts made from special materials, High-energy magnets, Magnetic shielding, magnetic material, Medical materials, un Pure iron nozarēs. Tas atrodas Köln, Vācija.
JERKO-SPRÜHSYSTEME GMBH

Vācija

Uzņēmums JERKO-SPRÜHSYSTEME GMBH, ir Ražotājs/ Izgatavotājs, gadā un darbojas Virzuļa sūkņi nozarē. Tas darbojas arī supplies for metal forging plants and machinery, pulverisers, pressure moulding, un measuring systems nozarēs. Tas atrodas Kempen, Vācija.
TIGGES GMBH & CO. KG

Vācija

Uzņēmums TIGGES GMBH & CO. KG, ir Ražotājs/ Izgatavotājs, gadā un darbojas Tērauda un metālu virpošana nozarē. Tas darbojas arī Forged steel parts nozarēs. Tas atrodas Wuppertal, Vācija.

Filtri

Rezultāti

Forging

Rezultātu skaits

17 Uzņēmumi