Rezultāti

Modules - Vācija

100 Uzņēmumi

0 Produktai

B + B THERMO-TECHNIK GMBH

Vācija

Since 1984, B+B Thermo-Technik gas been developing and producing innovative product and industry solutions with the highest quality standards for precise measuring jobs. Benefit from our many years of experience and expertise. We are based in the town of Donaueschingen in the south-west of Germany. From here, our quality products are distributed all around the world. The latest technologies in research, development and manufacturing and our certifications in accordance with DIN EN ISO 9001: 2015 and DIN EN 61340-5-1 mean that we produce our products to the highest quality standards. We also provide our customers with test certificates and DAkks (the German national accreditation body). calibration certificates. Quality and proximity to customers are integral parts of our strategy. This is why we predominantly manufacture in Germany and at fully owned subsidiaries all over the world. We guarantee continual quality controls, flexible responses to customer requests and modifications, as well as timely deliveries.

Mājas lapu
MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG

Vācija

Uzņēmums MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG, ir Ražotājs/ Izgatavotājs, gadā un darbojas Automašīnas - elektroniskās navigācijas sistēmas nozarē. Tas darbojas arī Kontroles un regulēšanas ierīces un instrumenti, Informācijas tehnoloģijas - programmatūra, Signalizācija - sistēmas un iekārtas, Radari un radionavigācijas aprīkojums, Elektroenerģija - izplatīšanas aprīkojums, Elektrība - komponenti un detaļas, Elektrība - sistēmas un ierīces, Aprīkoti biroji un telpas uzņēmējdarbībai - pakalpojumi, un Inženierpakalpojumi - rūpnieciskie uzņēmēji nozarēs. Tas atrodas Troisdorf, Vācija.
MJC ELEKTROTECHNIK GMBH HANDEL MIT ELEKTRONISCHEN BAUTEILEN

Vācija

Uzņēmums MJC ELEKTROTECHNIK GMBH HANDEL MIT ELEKTRONISCHEN BAUTEILEN, ir Vairumtirgotājs, gadā un darbojas Elektronika - rezistori nozarē. Tas darbojas arī Field effect transistors (MOSFET), High voltage rectifiers, IGBT modules, IGBT drivers, Capacitors for power electronics, Plastic capacitors, Load resistors, Power diodes, un Power electronics nozarēs. Tas atrodas Eisenberg, Vācija.
SOLARCRAFT GMBH

Vācija

Uzņēmums SOLARCRAFT GMBH, ir Izplatītājs, gadā un darbojas Saules enerģija - sistēmas nozarē. Tas darbojas arī Photovoltaics, Solar modules, Ondulators, PV storage systems, air conditioning systems, heat pumps, Substructure, Renewable energies, un Sustainable solutions nozarēs. Tas atrodas Karlsruhe, Vācija.
ROLLON GMBH

Vācija

Rollon is a leading manufacturer of linear guide systems, telescopic guides and linear axes. Rollon is a full-service provider for linear technology and linear systems and is recognised for its expertise, quality and many years of experience. The company possesses extensive product expertise, perfectly placing it to provide optimal solutions, whatever your requirements, and for a vast array of different applications. With subsidiaries in Italy (where its headquarters are based), Germany, France, the USA and the BRIC countries, and a dealership network extending to all four corners of the globe, the Rollon Group is well represented internationally. Rollon deliberately organises its sales structures so as to provide optimal customer support. This includes key account management for major target customers in certain industry sectors, as well as project support, coordination and management in close collaboration with the application engineers in Germany and Italy. Rollon is a complete provider and system supplier in the field of linear equipment.

Mājas lapu

Lapa jūsu uzņēmumam

Jūs varat redzēt šo? Arī Jūsu potenciālie klienti Pievienojaties mums, lai būtu redzamiem europages mājas lapā.

Pievienot manu uzņēmumu

EWS WEIGELE GMBH & CO. KG

Vācija

The foundation of EWS dates back to 1960. Our current core competencies are in the area of tool systems for CNC turning machines (static and power-driven tools), expanding to tool turrets and revolver support systems with EWS Korea. The modern profile of the EWS Group is characterised by the individual talents of the more than 300 people that work for the Group. EWS products are "made in Germany". Our specialist expertise is demonstrated by our systems partnerships with DMG-Mori Seiki (Trifix and MSQP), INDEX (W interlocking and V strip), Sandvik (EWS Capto), Iscar and Arno (tool carrier systems). With our EWS Varia quick-change system (modular system, often incorrectly designated as Vario), our company is setting new benchmarks in optimising tool setup times. This system was awarded the Innovation Award from the state of Baden-Württemberg.

Mājas lapu
SCHOBELI DEUTSCHLAND GMBH

Vācija

Since it was founded over 20 years ago, Schobeli Group has undertaken more than 400 projects throughout Europe. Our highly diverse range of services is oriented towards long-term solutions. From general project management to full supervision of installation and construction, we offer customers complete solutions tailored to their specific needs. We offer a 24/7 rapid on-site service throughout Europe. This means we can continue to support you with maintenance and repairs well beyond your order. Our Smart Repair process enables us to repair surface damage invisibly and at comparatively low cost. Through intensive cooperation with our partners and suppliers worldwide, we always use the latest technical expertise and state-of-the-art materials.

Mājas lapu
INGENERIC GMBH

Vācija

INGENERIC develops and produces optical components for high-power applications such as optical systems for research, medicine, measuring technology and various branches of industry. INGENERIC was founded in 2001 and currently employs around 100 members of staff. In 2019, INGENERIC consolidated with Aixtooling, a tool manufacturer for precision optics. INGENERIC offers the entire process chain worldwide, from lens and system design to prototypes and manufacturing of small runs right up to mass production. We manufacturer the following products: Fast- and slow-axis collimation, collimation modules, beam transformation optics, micro-lens arrays, aspheres, spheres, freeform optics. With a unique technology profile, INGENERIC has become one of the leading providers of beam transformation optics for semi-conductor lasers. The highly precise micro-lenses are used in growing markets such as medical technology (endoscopy) and in optical data communications.

Mājas lapu
BARTHELME LED SOLUTIONS

Vācija

Barthelme is an innovative family owned and managed business and is one of the technology leaders in LED lighting systems. To this day functionality and design are the focus of the business that was founded in 1931 by Josef Barthelme. Luminaires from the “Made in Germany” collection are developed and manufactured with a passion for the product and for the customer at the company headquarters in Nurnberg. The Barthelme product range includes IP protected flexible LED stripes, a variety of innovative profiles and customized luminaires through to intelligent controllers for comfortable lighting management. In this way, Barthelme offers high quality customer-specific solutions for expressive indoor and outdoor lighting projects - from a single source.

Mājas lapu
ASG ALLWEIER SYSTEME GMBH

Vācija

Since 1970, the name Allweier has been a byword for high-quality system components, turned and milled parts, as well as gearbox technology, in the high-tech Lake Constance region. Since 2002, Allweier Systeme GmbH (ASG) has combined core expertise in gearbox construction and drive technology. The company quickly earned itself a reputation on the market as a supplier of innovative and top-class products. Wheel hub gearboxes from ASG are used wherever there is a need and appreciation for high power density, power, endurance and 100% Made in Germany. On the basis of these powerful gearboxes, we have developed complete, ultra-efficient drive trains together with expert partners. The result is modular, compact and customer-specific drives which meet the highest quality standards. Keep on rolling – fulfilling our customers' aspiration to be and stay in motion is our objective. Keep on rolling.

Mājas lapu

BVS ELECTRONICS GMBH

Vācija

Welcome to BVS Industrie-Elektronik. In addition to repair, sale and service for large brands such as SIEMENS, FANUC, BOSCH REXROTH/INDRAMAT, HEIDENHAIN, KUKA, ABB, SEW, LENZE and HELLER, we have also been offering our own HMI / IPC solutions through our band unipo® since 2017. With over 100, 000 exchange and replacement modules stored at our site in Hanau, as well as more than 190 employees serving more than 10, 000 satisfied customers worldwide from virtually every manufacturing and processing sector, we are one of Europe's leading service providers in our market segment. Thanks to the quality BVS has been consistently striving towards for decades, we now work with several large control and drive manufacturers. As the only company worldwide working in the industrial electronics maintenance sector, we carry our status as "Bosch Rexroth Group Service Point", among others, with pride.

Mājas lapu
KARL KRUSE GMBH & CO. KG

Vācija

Karl Kruse GmbH stands for the service-oriented and reliable sale of electronic components. Worldwide special procurement and distribution in the event of bottlenecks, strategic coverage of your long-term needs. We offer the entire supply chain for the development, qualification and production of cutting-edge electronics. Karl Kruse specialises in facilitating fully transparent and integrated global supply chains and providing clever procurement solutions such as cost-saving services, warehouse management, safeguarding the availability of discontinued components and much more besides.

Mājas lapu

GEORG MARTIN GMBH

Vācija

Martin – your partner for precision. We have been producing metallic intermediate layers as well as stamped and deep-drawn parts for the mechanical engineering and plant construction industries for more than 60 years. Our customers come from all important fields of industry, particularly printing machines and the automotive industry, as well as companies in the aerospace sector. Reliability is of key importance for our over 100 employees who meet the highest requirements for precision and quality on a daily basis thanks to their committment, many years of experience and technical expertise. Our products include: Spacers, metal intermediate layers for mechanical engineering, washers, precision stamped parts, stamped parts, metal foils, adhesive steel foils, contract manufacture of mechanical assemblies, engine mounts, laminated shims, 2D laser processing, sheet metal precision assemblies

Mājas lapu
ALMETEC GMBH

Vācija

Almetec has stood for high-quality aluminium products since 1993. Our aim is to deliver the highest quality while, at the same time, conserving natural resources – and we do this for a wide range of industries: - Medical technology - Computer industry - Roof and façade construction - Automotive industry - Furniture industry - Mechanical engineering - Wind and solar - Energy technology - Food industry - Trade fair construction and display market. Our strengths lie in the development, design, manufacture and assembly of complete assemblies. As a rule, these consist of specially coordinated aluminium profile systems that are developed to meet all customer requirements. Every year, we process over 2500 tonnes of aluminium and stainless steel into quality solutions. Our production ranges from sample production and small batches to complete annual requirements for individual customers. On request, packed in cardboard boxes free of charge.

Mājas lapu
SCHMALE & SCHULTE GMBH

Vācija

Our company was founded in 1954. In the early days of the company, fittings were produced by aluminium chill casting. At the start of the 1980s, zinc die-casting became an established part of production. Shortly afterwards, production was expanded to include the field of aluminium die-casting. Our successful company development is still shaped by a balanced relationship between tradition and progress. Today, we supply our discerning customer base across Europe – in industrial and medical technology, mechanical engineering and the automotive, construction and furniture industries – with products made by aluminium die-casting, zinc die-casting and aluminium chill casting. With our core competence in the areas of aluminium and zinc die-casting, as well as aluminium chill casting, our customers receive daily support in producing and supplying ready-to-install casting components.

Mājas lapu
PRÜFREX INNOVATIVE POWER PRODUCTS GMBH

Vācija

PRUFREX has mastered the development, production and assembly process all the way to the completion of installation-ready electronics components. As a manufacturer of electronic control units and digital ignition systems, we have the whole EMS context covered at the highest level. Coil winding technology, circuit board assembly, component assembly, testing and potting – PRUFREX performs the whole production process under one roof. 100% functionality tests, for example ICT/FCT, accompany the production process and ensure minimal return rates. Manufacturing is located in Germany and the USA. Whether conventional manufacturing, or semi-automated or fully automated production: With us, you can count on the highest quality as well as economic efficiency. One of our special strengths here is the PX ROBUST DESIGN. We can bring competitive product improvements into production quickly, economically and tailor-made for your application. The best engineering department in the competitive environment with more than 1, 000 successful development projects form the foundations on which PRUFREX develops its forward-looking market solutions. We are a development partner coming from the standardised, highly integrated Small Engine sector. Our highly adaptable modular engineering is closely integrated with in-house production.

Mājas lapu
HNP MIKROSYSTEME GMBH

Vācija

precise pumps – smart solutions HNP Mikrosysteme develops, manufactures and markets pumps worldwide. These micro annular gear pumps (mzr®-pumps) are used where fast and highly precise dosage is required. Five pump series enable: - a minimum dosage volume of 0.25 µl - a flow rate range from 1 µl/h to 1152 ml/min - pressure up to 150 bar These pumps stand out for their pulseless delivery, minimal dead volume, long service life, small dimensions, highly resistant materials and ease of maintenance. Furthermore, we offer individual application advice as well as filling and dosing systems for the following areas: - mechanical and plant engineering - chemical and pharmaceutical process engineering - medical and analytical instrumentation Every metering application brings new challenges. We look forward to your inquiry and will thoroughly discuss your application as well as advise you in detail regarding pumps, systems, filters, controls, sensors and much more. HNPM is based in Schwerin (in the North of Germany). Round about 90 employees work in construction, development, quality assurance and assembly or at our technical sales team, consisting of engineers and scientists.

Mājas lapu
KENDRION KUHNKE AUTOMATION GMBH

Vācija

Kendrion Kuhnke Automation is your specialist for magnet, fluid and control technology and offers safe, precise and innovative components and assemblies for a wide range of applications. Kendrion Kuhnke Automation is part of the industrial division of Kendrion N.V. und trades under the Industrial Actuators and Controls (IAC) business unit. When it comes to developing and manufacturing electromagnets and actuators, IAC benefits from over 100 years of experience and offers a wide range of products. In addition, IAC is a fluid technology manufacturer specialising in the development of custom valves, valve blocks and pressure regulators. In the field of control technology, IAC uses the internationally recognised industry standards in order to enable integration into a wide variety of infrastructures, as well as inductive heating systems that enable emission-free heating in industrial processes. Our products are primarily used in medical equipment, such as dialysis machines, anaesthesia machines, respirators, dental units, treatment equipment and therapy equipment. They are also used in automation and robotics, such as for FTS, material handling systems and cobots. Furthermore, they are used for mechanical engineering in the food and drink industry, in printing and paper processing and in the textile industry. Further applications include fire protection and access controls in building technology and emergency oxygen supply and in-cabin applications in aviation. Find out more about Kendrion at www.kendrion.com

Mājas lapu
LANTHAN GMBH & CO. KG

Vācija

Lanthan GmbH & Co. KG has specialised in obstacle lighting in the aviation industry since 2006. Our company boasts many years of experience and expertise in wind energy. Our products, which are made in Germany, are of high quality and have a long service life. We focus in particular on our customers' satisfaction. In addition to this, we are continually trying to improve our products and make them more efficient. Due to being a member of many national and international bodies, we have a very good network in this sector. The demands we place on ourselves are thereby measured and motivated by current events. The planning and implementation of projects is our day-to-day business. We also focus on the development of modified products for a wide range of projects. Dealing with challenges competently makes us your contact in the area of lighting.

Mājas lapu
SAXONIA-FRANKE GMBH & CO. KG

Vācija

As a quality-conscious family business, SAXONIA-FRANKE supports its customers in all areas relating to stamping and forming technology, plastic injection-moulding technology and assembly installation. The company was founded in 1981 by Jörg Franke in Göppingen. The opportunity to move into a new, larger production building arose as early as 1987. Over the following years, extensions were built repeatedly, in order to cope with the constantly increasing order development in the company. In 2016, a new logistics centre was inaugurated. This measure allowed the production area to be expanded. Back in 2011, a generational change was introduced, and Felix Franke entered the management. Our success is based on innovation and drive, as well as a continuous commitment to quality and delivery reliability. This is ensured through qualified employees, through the use of the latest technology for machinery and through a uniform and sustainable concept for the implementation of tasks put forward by the customer. It's important to us here that the quality and economy of our work and products are closely linked with responsibility for the environment and society. Our integrated management system includes quality, environmental, work and health management. We are certified in line with ISO TS 16949, ISO 9001, ISO 14001, EMAS III and OSHAS, and are practitioners of the German Sustainability Code.

Mājas lapu

HOCHRAINER GMBH

Vācija

At our site in Freilassing – in the Berchtesgadener Land in Bavaria – we bring assembly plants and production facilities to life, from the initial concept all the way through to the implementation. With around 130 employees, a concise corporate structure and deep vertical integration in mechanical engineering, our company is in a position to quickly and flexibly address our customers' requirements. When it comes to automation and rationalisation, companies from the widest variety of sectors number among our customers: Automotive, electrical engineering, mechanical engineering, fittings and plumbing, domestic appliances, tools, security technology, medical technology, etc. Benefit from our more-than 40 years of experience as a systems supplier for assembly technology and plant engineering.

Mājas lapu
PEAK ELECTRONICS GMBH

Vācija

Founded in 1998, based in Nackenheim nearby Mainz, Germany, PEAK electronics is a leading supplier of DC/DC Converters and AC/DC Converters, with over 25 years of experience. The product range is supplemented by Switching Regulators, LED Drivers, Extensions and Accessories like DIN RAIL, Chassis, Heat Sink, as well as Tape & Reel Packaging for our SMD Converters. Beside that, we offer individual customer-specific solutions. PEAK electronics GmbH is certified according the international standards ISO 9001: 2015 for the development, production and sale of DC/DC and AC/DC converters.

Mājas lapu
OSSENBERG & GREFE GMBH

Vācija

Our company was founded in 1864 as F. Ossenberg & Co. KG, and is now in its fifth generation of family ownership. Since the acquisition by Julius Grefe KG in 1997, we have traded under the name "Ossenberg & Grefe". We are naturally certified in accordance with ISO 9001. The original manufacturing programme for both companies consisted of buckles, rings and hooks for the textile and leather processing sector. Over time, articles for other areas of application were added to the product range. Today, alongside our standard range of products, we specialise in the manufacturing of wire-bending, punching and assembly products for more than 1000 customers from a wide variety of sectors. To this end, our 60-strong team manufacture approximately 500, 000 parts a day over a production area of 5000 m². Thanks to our versatile machining options, in-house tool manufacturing facilities and electroplating equipment, we are able to find quick and cost-effective solutions to complex challenges.

Mājas lapu
LENZ, KÄMPER GMBH & CO KG

Vācija

LENZKÄMPER is one of the leading providers of bent-wire parts on the German market. Over the course of more than 90 years, LENZKÄMPER has become a specialist in producing technically complex bent-wire parts and components with high safety requirements. We not only manufacture individual bent-wire parts, but also complex welded units and hybrid components made from wire, sheet metal and plastic. Our flexible machinery enables us to efficiently produce series of any size for you, and our internal tool shop means we can even make prototypes at short notice. So that we can provide the best customer service, we place particular emphasis on providing customer-oriented consulting. We work with clients to devise and develop technical solutions, and guarantee a seamless transition between technical consulting, prototype production and series production.

Mājas lapu
MINITEC GMBH & CO. KG

Vācija

Precision and perfection: This is what MiniTec GmbH is all about. What began in 1986 with miniature linear guidance systems, developed into a full service provider now recognised globally with around 360 employees in nine plants and more than 60 partners and service support centres all over the world. The extensive product range includes high-quality aluminium profiles and powerful materials handling technology such as conveyors, precise linear guidance systems, profile systems, fire fighting technology and ergonomic workplace systems. Within the automation technology and specialised mechanical engineering sectors, MiniTec provides versatile solutions. From testing facilities to leak tests and eddy current testing, efficient materials handling solutions such as conveyors, roller conveyors, spiral conveyors or toothed belt conveyors as well as assembly technology solutions for one piece flow, materials handling and Kanban systems: MiniTec can provide multiple options to optimise and automate your assembly lines and existing production processes.

Mājas lapu
HIP HOMANN IMPORT & PRODUKTIONS GMBH & CO. KG

Vācija

We have many years of experience and guarantee that our products will provide secure support for all your applications. We operate as a global system supplier for industrial companies from our sites in Altenberge (Germany) and Kaohsiung (Taiwan). Secure and solid! Our high-quality fasteners enable us to fix various materials and components securely. So that you can benefit from your affiliation with us, we will additionally facilitate your work thanks to individual services for screws, nuts and more. Flexible service! Whether from our headquarters in the North Rhine-Westphalian district of Altenberge, Germany, or from our agency in Kaohsiung, Taiwan, we supply our products to industrial companies from a range of sectors.

Mājas lapu
LAMP TECH JOHANNWILLE & SANTOS GMBH

Vācija

LampTech is a lighting products manufacturer that produces various high-grade IR lamps. LampTech's wide product range includes individual tube IR lamps and twin-tube IR lamps. The range of IR lamps from LampTech has been most recently extended by the fast medium wave infrared lamps. LampTech manufactures UV lamps (ultraviolet lamps) for professional use, particularly for the printing industry. The UV lamps from LampTech are, for example, used for gravure printing, screen printing, offset printing, flexographic printing and letterpress printing. Our products: Infrared lamps, infrared heat lamps, UV lamps for printing ink and paint drying, radiant heaters, ultraviolet lamps, infrared drying systems, short wave infrared drying systems, infrared drying devices, infrared driers for printing machines.

Mājas lapu
BASTIAN INDUSTRIAL HANDLING GMBH

Vācija

Your quality service provider. Comprehensive, customer-oriented services. Quality assurance. Testing and measuring. Visual sorting activities or using technoscopes, endoscopes, etc. Error controls. Documentation. Test report. Storage. Commissioning. Shipping. 8000 m2 modern storage facilities. 2500 m2 secured yard area. 3000 heavy duty high-bay storage spaces. Warehouse software. ERP software. Packaging of individual parts. Production runs. Components. Wooden crates. Special packaging. Plastic blister. Film. Parts manufacture machining (turning, milling, etc.). Construction of jigs and fixtures. Pre- and final assembly. Component assembly. Furniture disassembled. Post-processing. Packaging. The skills: First class and up to date. Hardware. High-tech testing devices. CNC handling machines. Measuring equipment. Blister and film packaging machines. Sophisticated software. Modern storage and assembly halls. Infrastructure. Direct connection to motorway. Connection to A 8 and A 6. Central location in Europe. Qualification of specialists in all areas. Continuous further training.

Mājas lapu
FÖHRENBACH GMBH

Vācija

Developers and manufacturers of high-precision components, units and systems for linear and rotary movement in automation technology and precision mechanical engineering. Föhrenbach products are the solution for guiding, driving, movement, control and positioning tasks. The additional products offered alongside these solutions expand the range to provide complete customer-specific solutions up to and including special machines. The supply range includes, for example, SVAN adjusting slides, dovetail slides, roller slides and compound slides, motor-controlled precision slides with KBS, KCS and KCL ball bushing guides (with direct drive), compact PCL and PFL profile guide slides with integrated linear motor and measuring system, PFS profile guide slides with spindle drive, LDH direct drive handling modules, RT2A rotary table series (with screw drive) and RT3A series (direct drive), rotating and swivelling units, indexing heads, press axes, and linear and path control systems.

Mājas lapu
XIMEA GMBH

Vācija

XIMEA develops and distributes industrial and scientific grade cameras for various applications. Our core strengths include particularly compact form factors in comparison to sensor size, low latency and energy consumption, as well as super-fast interfaces and high resolutions. From high-performance cameras to embedded and multi-camera systems – XIMEA offers special products for the most ambitious of requirements. Series cameras and customer-specific developments and modifications are used by leading technology companies and visionary start-ups all over the world. With over 25 years of experience, the engineers at XIMEA are continually setting new standards in the industrial and scientific image processing and imaging markets. You can find more information at www.ximea.com or on Facebook and LinkedIn.

Mājas lapu

Filtri

Rezultāti

Modules - Vācija

Rezultātu skaits

100 Uzņēmumi